This quality design is created and copyright protected by Patti's Creative Studio.

You may stitch the design on items for yourself or for sale. No portions of the design - in part or whole - may be copied, shared, distributed, sold or made part of another design without my permission.
If you have any questions, don't hesitate to contact me.

http://www.pattistudio.com
http://www.oregonpatchworks.com/collections.php?id=PCS
pattistudio@seznam.cz

Be careful to read the instructions. The colors that appear on your screen do not always response to the colors that you shall use, some color changes only serve as color stops. 

These Designs Are Intended To Be Used For Photo Frames But They Can Sure Be Used Also As Quilt Labels Or Frames For Monograms. Each Design Fits Exactly 5x7 (13x18cm) Hoop. 

As a stabilizer I use either Solvy (Aquamagic, Vilene etc.) or some tear-away kind of stabilizer. 


Vioframe-free

90.00x130.00 mm; 5,422 stitches

Color Changes
1. Zig-zag outline (any color, preferably the color of the fabric)
2. White
After you embroider this color, put the hoop out of the machine (DO NOT UNHOOP) and cut gently the fabric away from    inside the oval. Be careful not to catch the stabilizer!Place hoop back in the machine and continue with the same    color.
3. White (same as color 2)
4. Leaf Green
5. Lavender
6. Yellow
7. Violet


When you're done with embroidery, unhoop your fabric and tear away the stabilizer from inside the oval or rectangle. If there are any small threads remaining in the opening, either trim them with small scissors or use the wood-burning tool. If you used Solvy, rinse it in the water. If you used tear-away stabilizer, leave it on the back as it gives the design the body and it remains flat in the frame. Trim away the fabric around the 5x7 square, close to the zig-zag stitch. Iron and put it in the frame. 

